WORKSHOP SCHEDULE
Project Repair offers repair workshops throughout the year. Most are held in our Teaching Center (take a Virtual Tour of our workshop where we offer classes,) but some--especially summer classes--are held "on-site" in participants' homes. These classes provide hands-on practice and are kept small to maximize learning.
HRRC charges a modest materials fee for our Project Repair workshops. The classes are open to all Cleveland Heights residents. Reservations are a must! Call 381-9560 to save your space.
Note: In addition to Project Repair's "hands-on" workshops for do-selfers, Home Repair Resource Center also offers HouseMender University, information sessions that provide "free advice from the experts," and an interactive workshops series on Financial Fitness.
MARCH
COPPER WATER LINES
Monday, March 1st, 7 - 9 p.m.
You’ll learn to measure, cut, and solder copper pipe and fittings. You’ll also practice making various types of connections in water supply lines and learn where each should be used.
REPLACING GALVANIZED WATER LINES WITH COPPER
Monday, March 8th, 7 - 9 p.m.
At this class, you’ll assemble copper pipe and fittings to replace old iron supply lines "on-site" in a Cleveland Heights home.
PLASTIC WATER LINES
Monday, March 15th, 7 - 9 p.m.
If you want an alternative to copper, two types of plastic water lines have now been approved for use in Cleveland Heights. We’ll show you how to measure, cut, and connect each type, and how to ensure your installation will pass inspection.
PVC DRAIN LINES
Monday, March 22nd, 7 - 9 p.m.
We’ll discuss how your drain lines function, and how to maintain and update your drain system. You’ll learn how to assemble plastic drain pipes, fittings, and traps, and how to operate a drain snake to clear clogged lines.
FAUCETS & TOILETS
Monday, March 29th, 7 - 9 p.m.
We’ll show you how to repair those annoying leaks in faucets, valves, and toilets; how to replace a toilet; and what tools to use when your toilet is clogged.
APRIL
HARDWOOD FLOOR REFINISHING
Monday, April 5th, 7 - 9 p.m.
You'll practice sanding a floor with a flat plate sander and learn how to complete the process with stain and/or polyurethane.
LAMINATE FLOORING
Monday, April 12th, 7 - 9 p.m.
If you’re considering laminate flooring (Pergo™, etc.), this class may help you decide which product will best fit your needs. We’ll show various materials and how each is installed.
DOOR LOCKS & DEADBOLTS
Monday, April 19th, 7 - 9 p.m.
At this class, we’ll discuss various kinds of door locks and the advantages of each. You’ll then practice installing a deadbolt on an exterior door, using a hole saw on your drill.
PLASTER REPAIR
Monday, April 26th, 7 - 9 p.m.
Learn to repair plaster--small cracks to larger areas. We’ll show you basic techniques, “tricks” for a smooth, solid surface, and ways to minimize the spread of lead-based paint dust.
MAY
FLAT ROOF REPLACEMENT
Monday, May 3rd, 7 - 9 p.m.
Learn how to replace a "flat" roof over a porch or shed-type garage using cold process modified bitumen roofing, which lasts far longer than traditional asphalt roll roofing.
PORCH RAILINGS
Monday, May 10th, 7 - 9 p.m.
You'll learn how to construct a wooden railing and install it on a second floor porch roof in such a way as to minimize leaks.
SHINGLED ROOFS & FLASHING
Monday, May 17th, 7 - 9 p.m.
Learn the right way to replace a shingled roof--minimizing leaking and ice build-up--and replace torn or missing shingles.
GUTTERS & DOWNSPOUTS
Monday, May 24th, 7 - 9 p.m.
Learn to connect and hang gutters at the proper pitch. We'll discuss sectional vs. seamless gutters, metal gauges, and how to replace rotted fascia boards and rafter ends.
Check back for future workshops...
|
